Category Archives: Product

ESP8266_Wi-Fi_Module

The ESP8266 – A Tutorial – Part 1 Environment Setup

You can download our e-book ‘Learn Arduino’ from this link Introduction The Internet of Things is a relatively new concept in the world of electronics. It was also quite expensive and maybe even unreachable by some hobbyists. The introduction of the ESP8266 changed that perception forever. Being first designed as a simple Serial WiFi adapter; today it is the most common IoT device among electronic hobbyists and hackers alike. The… Read Article →

Arduino Bluetooth Tutorial HC-05

You can download our e-book ‘Learn Arduino’ from this link Bluetooth has been around for quite a while now. Being a common way to communicate with mobile phones, it was only natural to include this protocol in the Arduino arena. Bluetooth is typically a low power, medium range device, in fact it can reach up to 10 meters. Bluetooth operates on the same frequencies as WiFi, 2.4Ghz.Connections are normally one… Read Article →

lightbluebean

LightBlue Bean – Zero Wires

You can download our e-book ‘Learn Arduino’ from this link Can you think of a device, which has a builtin 3v CR2032 battery, very small and portable, can run for over a month on a single battery and has a builtin BLE (Bluetooth Low Energy) device? No? We have!! The LightBlue Bean has all the features mentioned above and more… much more. First of all, this tiny device can be… Read Article →

Transceiver 433mhz

Arduino 433Mhz RF Wireless Data Transfer

You can download our e-book ‘Learn Arduino’ from this link The most practical and cool way of sharing data from 1 Arduino to another is by far using a radio transmitter and receiver. The simplest form of wireless transmission (I could find) is the 433Mhz ASK modules. They come in pairs, a receiver and a transmitter. They are ridiculously cheap, selling at $1 or less a pair!! These modules provide… Read Article →

hc-sr04 ultrasonic range finder

Arduino Ultrasonic Range Finder – HC-SR04

You can download our e-book ‘Learn Arduino’ from this link In this tutorial we present a method of measuring the distance between an Arduino and nearby objects. It is of particular use for automated robots for giving them ‘eyes’ to look out for nearby objects, measure the distances between them, and acting upon that distance. We present the HC-SR04 range finder sensor The cheap sensors normally have 2 cylindrical objects… Read Article →

Digispark

Introduction to Digispark

You can download our e-book ‘Learn Arduino’ from this link In today’s blog post we’ll analyze one of the smallest and most practical boards out there. The Digispark board. It’s size, including the USB port, is 25mm x 18mm (so tiny)!! This little board is powered by an ATTINY85 chip and clocked to 16.5Mhz. For conveniece, it has a built in USB port and can be plugged into a your… Read Article →